Window Cracks and How to Repair Them
October 11th 2019

Window Cracks and How to Repair Them

Did you know that a broken window is not just an eyesore, but it can actually be costing you money as it’s letting valuable energy leak out of your home? That’s why it is important to address the issue at hand before it becomes any worse. The first step is to identify what kind of crack you are dealing with. Knowing what kind of window crack you are dealing with can help you determine if you simply repair the glass or if an entirely new replacement window is required.

Impact Cracks

An impact crack is probably what first comes to mind when you think of broken windows. As you might have guessed from its name, an impact break is caused by the force of an object hitting your home’s window. Think the kids next door playing baseball or a golf swing that’s gone wrong. You can usually tell when this kind of crack has occurred because of the identifiable starburst pattern that spreads outwards from the point of collision.

For your own safety, if you experience an impact break in one of your home’s windows, take caution when cleaning up. While you should remove any shards of glass that are inside your home, it is highly recommended that you do not attempt to remove the broken window yourself. Due to the nature of the crack, you may end up severely hurting yourself. That is why it is best to leave it to a professional to install a replacement window.

Close up of an impact crack in a window

Stress Cracks

In most cases, a stress crack will start small, typically near the edge of the window. Over time, it will continue to expand and spread across the glass, resulting in a bigger issue than you may have anticipated. Stress cracks are most often caused by intense fluctuations in temperature, specifically major variances between the two. For example, this means when it is extremely cold outside so you drastically increase the heat inside your home in order to stay warm.

It is also possible for stress cracks to appear due to more physical distresses, such as slamming a window shut. Always treat your home’s windows with care in order to avoid a self-induced stress crack which will likely require costly repairs.

Pressure Cracks

A pressure crack is probably the least common kind of break in a window. It most commonly occurs in double-paned windows, or insulated glass. They may seem to happen out of nowhere but in reality, they are caused by dramatic shifts in pressure due to extreme weather. It can also happen if windows are installed at a too low or too high level of elevation. The windows cannot withstand the pressure of these scenarios and will crack as a result.

You can tell that a pressure crack has occurred due to the shape of the break in the glass. In most cases, the crack will follow a curve in the shape of an hourglass. If you experience a pressure crack, you will most likely have to do a complete window replacement.

How to Repair a Cracked Window

Repairing broken glass in a window is usually only a temporary fix. There are some simple, quick fixes you can try, but the only truly safe and permanent way to fix cracked glass is to install a replacement window. If a temporary solution is exactly what you’re looking for while on the hunt for the perfect new windows for your home, you can try one of these following fixes.

Try applying tape to either side of the crack on the glass. This will keep the glass intact and prevent it from breaking further, while simultaneously keeping water from leaking through. Make sure to extend the tape past the crack on both sides, pressing it firmly into the glass for the best results.

Glass adhesives that are typically advertised for use on car windshields are also an option. Thoroughly clean the break, flushing out any potential debris with an eyedropper before applying tape to the back of the crack. This will keep the adhesive from leaking out the opposite side of the window. Using a syringe or brush, apply the adhesive to the crack and allow it to dry completely before you remove the tape.

Additionally, you can replace the single pane of glass that has been affected. This will require the assistance of a professional glass repair technician as it is a complex job that you do not want to further problems with.

A professional window technician installing a replacement window

Replacement Windows Toronto

In instances of cracked glass, it is almost always recommended that you have a replacement window professionally installed. Replacing a window yourself might be tempting, but it can be extremely difficult, especially if you are dealing with a delicate insulation seal. Hiring a window installation company will save you time and money should your DIY attempt go wrong.

While replacement windows might seem like the pricier solution rather than simply repairing a crack, that is not always the case! Leaving a problem like a broken window unresolved, or only temporarily fixed, can actually result in you paying more each month for your energy bills. When a window’s glass cracks, the seal that contains the argon gas that insulates your windows leaks out, rendering your window ineffective and non-energy efficient. The one-time payment for new windows can cost you a lot less than years and years of increased energy bill payments.

Even if you think the small crack in your window isn’t that bad, it will only get worse with time. That’s what you shouldn’t wait any longer to contact Burano Doors! One of our expert window technicians will be able to assess the situation and recommend the best course of action.

Posted by Raj Kain
0 Comments

Leave A Comment